DESCRIPTION

• The Pro Series Hooded peep weighs only 9.5 grains.
• Accepts all original Specialty Archery 1/8″ and smaller Apertures, Clarifiers, and Verifiers.
  • NOTE: Not compatible with Podium, PXS, or PXL Hunter Peep parts.
• Use of our Dual Aperture Wrench (#210078) is needed for insertion of Apertures, Verifiers, and Clarifiers.
• Hooded Peep helps reduce glare on Clarifier and Verifier lenses.
  • The optional screw-in Verifier lenses sharpen the pins.
  • The optional screw-in Clarifiers when used with a scope and lens sharpen the target face.
• The peep opening is 3/16″ with no Apertures, Clarifiers or Verifiers installed.
• To protect your peep from dust, debris and moisture we recommend the Peep Guard (#PG1-BLK or #PG1-RD).
• Available in 37 or 45-degree string angles.
  • See the String Angle Chart in the FAQs tab on the home page to determine which string angle is needed for your setup.
• The peep should be inserted in the string so the side with the verifier, clarifier, or aperture is on the side you look through.
• Available in Black, Blue, Camo, Green, Pink, Red, Purple and Silver.
• Standard Target Peep and component weights:
  • Ultra Lite Non-hooded Peep – 7.5 grains
  • Pro Series Hooded Peep – 9.5 grains
  • 1/8” Clarifiers/Verifiers – 4.0 grains
  • 1/8” and Smaller Apertures – 2.5 grains
  • Standard Peep Aligner (#PAS) – 13.0 grains