The new JBC038-11 from enecharger is a fully automatic quick charger designed for 1 to 16 Ni-MH AAA & AA cells .

Specially designed for rechargeable batteries used in digital and audio products. The JBC038-11 has the following features:

• Recharges 1 to 16 pcs of any mix* of AA and AAA batteries at a time.
• Powered by an external ANZ (SAA) approved AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
• Includes 12V car lighter adaptor
• Each cell charges independently of the other
• 16 independent channels with individual LCD display for proper charge, discharge & trickle charge
• Intelligent microprocessor controlled
• With negative delta V cut-off function
• Refresh discharger function
• Temperature sensors to avoid battery damage caused by over-heating
• With mechanical & electrical protection against incorrect polarity
• Auto detects faulty and non-rechargeable batteries
• With maximum charging timer control for overcharge protection
• Charge rate - AA cells 500mA, AAA cells 250mA
• Discharge rate - 250mA

Battery capacity & charge times

• AAA 700mAh   4.0 hours
• AAA 900mAh   5.0 hours
• AA 1000mAh   2.75 hours
• AA 1600mAh   4.5 hours
• AA 2000mAh   5.5 hours 
• AA 2300mAh   6.5 hours
• AA 2900mAh   8.0 hours

For a selection of NiMH (nickel metal hydride) batteries suitable for this charger please click here.

*Whilst this charger can charge any mix of NiMH AA/AAA batteries at the same time it is not recommended to use a mix of different batteries together in your battery powered equipment. 
It is not recommended to charge cells below 700mAh on this charger. Use a lower output current charger for lower capacity cells.

For a faster multi-cell charger, see our model NC8700 (1-8 AA/AAA cells).