Under Floor Brake Booster - Master Cylinder Floor Cover Kit - universal fit
2mm Floor cover plate, 4mm frame plate with taped holes, and M6 bolts.
KB-MSP-20-40-MCYL-CVR-KIT
$28.19
Enter your e-mail address to be notified when product is in stock
Notify Me!
Seller Info
kustombitz (3001)
Seller Accepts
Shipping Policy
Order values over $200 is bank transfer only. No credit cards and no PayPal over 200 bucks. We just don't send them out if correct payment method is not made. *****NOTE***** Detailed descriptions of each item are on our website www.kustombitz.com.au do not ask questions here on the AShop Market Place as it does not list the product description info which is a pain in the arse. Go direct to our website it should make more sense, it is laid out better and be easier. We ship once a week depending on the workload in our custom car fabrication workshop. We are a small operation building cars as well as selling parts. Car builds take priority, we usually ship parts mid week or end of week. Kustom Bitz does not sell intentionally, we only do local sales within Australia.
Return Policy
Money Back within 14 days
Description
Part# KB-MSP-20-40-MCYL-CVR-KIT ; Kustom Bitz underfloor brake master cylinder floor cover kit.  Comes with a 2mm thick cover plate with nicely rounded corners and slotted holes for ease of fitting, a 4mm thick frame plate to match with taped holes, and 4 x M6 bolts.

Suits double chamber underfloor master cylinder. Hole opening is 175mm x 95mm.

We use this kit in our workshop on both flat floors and floors with complex bumps and bends. The idea behind it is to give you a good framed opening that looks good from the top and underneath with proper taped holes and bolts. On flat floors you can just sit the plate flat up on the bottom of the floor so that it sandwiches the floor skin between the cover and the frame, then weld the frame plate to the floor. This gives you some leeway on not having to be so neat with your hole cut, because the frame and cover hide it. On bent floors with ridges and swages, as you can see in the example photos, you can shape it and cut it in, weld it up, and then dress sand it up, to give yourself a good flat surface for a good seal.

This is a much better soultion than your typical hacked out flat bit tin with some self drilling screws.
Reviews (0)
Currently there are no reviews for this product.
Questions
Currently there are no questions for this product.
<-- Digital window verification 001 -->