Freewing Pandora Interchangeable Multi-combination RC Plane (Four Planes-in-One), Receiver Ready, Blue Color. The Best Trainer on the Market!

    The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sports low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear whichis perfect for the RC Pilot Learning to fly, and there is a set of "Big Wheels" for Tail Dragger Configuration for the pilot looking to enhance their Warbird Training, these wheels are so good they even work on tall thick grass with ease. You literally have 4 combinations and can make 4 different planes from this 1 kit. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by wind as a smaller plane does and is the perfect setup for anyone looking to get into the hobby and learning to fly the right way. After getting the hang of flying your new model, simply change out the configuration to Low Wing and turn your trainer into a Aerobatic Sports plane at no additional cost.

NOTE: Optional flaps are molded into the wing along with aslot for the flap servos. Better yet, the hardware for the optional flap is included. You only need two 9 gram servos to make the flaps fully operational in about 10 minutes. If you use one flap channel, you will need a single Y lead, one forward 9g servo, and one reverse 9g servo. If you use two channels for flaps, you can use two forward 9g servos and reverse one channel using your radio. If you need any help picking servos, our team at Xtreme Hobby are happy to help.

• High wing and low wing configuration included in one plane
• Tricycle landing gear and tail dragger landing gear included
• Included BIG wheels for tall grass takeoff and landings
• Molded wing pocket for optional flap servos - push rods and linkage included
• Durable EPO foam construction
• Nylon hinges on all control surfaces
• Brushless motor, ESC, and 4 micro servos installed