Burris Eliminator III - 4X-16X-50mm
The Eliminator III with X96 reticle technology empowers the rifleman with even more accuracy and range.
B0200116
$1,361.72
Enter your e-mail address to be notified when product is in stock
Notify Me!
Seller Info
berettoz.shop033.com (36)
Seller Accepts
Shipping Policy
Orders are generally dispatched the following business day. Standard shipping times are usually 1-3 business days for domestic and 5-10 days for international.
Return Policy
Money Back / Exchange within 14 days
Description

The Eliminator III

The Eliminator III with X96 reticle technology empowers the rifleman with even more accuracy and range.

The 4X-16X-50mm Eliminator III Laserscope features an integrated 800 yard rangefinder coupled with a very simple yet very accurate method of customizing the trajectory compensation capability to virtually any cartridge. It has 
39 ballistic curves on board to select from and Burris provides a listing of nearly 600 factory loaded cartridges and the two digit ballistic curve number associated with each. A few clicks in the set up mode is all it takes to enter or change the ballistic curve to perfectly match your specific cartridge’s performance.

• 1200+ Yards
• Accurate at ANY Magnification
• New Ergonomic Activation Buttons
• Enhanced Extreme Range Ballistic Programming
• Sleek, New Design
• Parallax Adjustment 50 yd. to Infinity

Simple Operation & Programming

At the press of a button, you enter the Drop Number and Ballistic Coefficient appropriate for your ammunition. This data is available in the Cartridge List (1,500+ Specific Loads) provided by Burris or from just about any ballistics software program.

Range Compensation

To range, place the cross hair on your target and press either button on the objective bell. In less than a second, the range to your target and a lighted dot will appear indicating the correct aiming point for your specific ammunition for the distance to the target.

Windage Compensation Innovation

The X96 reticle provides a convenient and accurate METHOD to more easily compensate for wind. However, complete wind compensation is NOT fully automated within the scope. It still requires some thinking on the part of the shooter. In addition to distance, the digital display will show a 10 MPH Wind Value for your specific cartridge at the indicated range to your target. This is a “Dot Value” that corresponds to the dots on each side of the reticle’s vertical post. These dots let the shooter precisely hold into the wind. The shooter still needs to estimate the cross-wind and convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind using the appropriate “Dot Value” as shown in the examples below.

 

X96 Reticle In Action

Examples at 300, 500 and 700 yards with a wind blowing to the right. 

    



Technical Specifications:

Laser Range* (yards reflective)  1200+       
Laser Range* (yards deer) 750+
Laser Accuracy  +/- 1 yard
Battery  CR-123A
Battery Life 5000 cycles
Operating Temperature -15° - +122°F
Field of View @100 Yards 26 - 7
Adjustable Parallax (yards) 50 - infinity
Exit Pupil (mm) Low - High  12.5-3.1
Click Value (Inch @ 100 yards)  1/8 MOA
Maximum Adjustment  40 MOA
Weight with mount & battery  861g
Optimum Eye Relief (Inch) 3.5 - 4.0
Objective End Dia (mm) 65
Clear Objective Dia (mm) 50
Ocular End Dia (mm) 42
Overall Length (Inch)  15.5
Mounting Rail Length (Inch) 8.5
Torque Spec. for Mounting Bolts  40-80 in.-lb.
 
Reviews (0)
Currently there are no reviews for this product.
Questions
Currently there are no questions for this product.
<-- Digital window verification 001 -->